PolyMide™ PA6-GF Nylon Filament

PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

1.75mm grey PA6-GF filament on 0.5kg spools. 

PolyMide™ is Polymakers family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing.

Polymaker PolyMide PA6-GF nylon filament 1.75mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.

PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, ESD safe fixtures, drone frame, prosthetics or handles.

Glass fiber filled nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole on the cardboard spool after use to avoid tangles.

Comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box.

Printing Setting - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do NOT exceed 50 ˚C); Speed: 30mm/s – 60mm/s; Annealing: 80℃ 6h

Note - It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints.